|
Other aspects of
the LOCKSHOP module are listed and linked in the column to the left.
The BATCH GENERATION is a very powerful and
robust portion of KeyNET. With it you can generate COMPLETE masterkey
systems with great speed and accuracy. This feature UTILIZES the best
Standards, Practices and Technology to produce KeyNET masterkey systems.
You have control of how you create masterkey systems.
You can create complete SFIC A2 Masterkey systems from this screen:
Blind Code - Simply select the IDENTIFICATION
for your NEW Small Format Interchangeable Core A2 Format Masterkey System.
Bitting - Select the bitting for your NEW
masterkey system. KeyNETTM
will generate 5, 6 and 7 pin systems. ONLY COMPLETE SYSTEMS are generated.
CK (Changekey) Blindcode - Select the Identification for your
NEW SFIC A2
CONTROL KEY. This code will be branded with Master Blind Code
to create your Masterkey System.
CK (Changekey) Bitting- Select the bitting for your Control Key Blind
Code. Remember that you need to maintain odd or even numbers in each pin
chamber.
Progression Sequence - You select can use the
default sequence, or change it to suit your desires and needs.
Keyway - Enter the keyway for your NEW masterkey
system.
Brand - enter the Manufacturer of the LOCKING
CYLINDER.
Lock Type - this information is selected from a
drop down menu which has been customized by your Systems Administrator. If
you do not see the option you desire, contact your Systems Administrator
and have it added.
Cut Code - This is the three digit code required
by your Computerized Key Machine to initiate the proper depth and spacing cuts
for the prescribed key.
Jaw/Insert - The Jaw/Insert is information
provided in conjunction with the Cut Code to insure the proper depth is obtained
when cutting your key.
Max Adjacent Cut - The Maximum Adjacent Cut is
preset for SFIC A2 Format Masterkey Systems.
Stack - Enter the Stack Height of your Lock
Manufacturer. Many lock manufactures have a defined STACK height
for pin chambers to improve operational efficiency and reduce the damage to the
springs.
To Prepare to Generate - Now that you have
entered the information, you are ready to "Verify" the information you have
entered. KeyNETTM
will now perform a number of checks to reduce the possibility of errors in your
information. If ERRORS are found...you will receive a warning, which will
cause you to return to the setup and make corrections, before proceeding.
If the information you have entered meets the benchmark
of KeyNETTM for this type
of system...you will see a screen that allows you to verify your work and
"Generate" you NEW Custom Masterkey System.
|
